FGH96涡轮盘低循环疲劳寿命分析技术与试验

分析FGH96涡轮盘的尺寸效应,分析了分别适合于FGH96亚尺寸盘和全尺寸盘的低循环疲劳寿命预测方法.成功设计了FGH96亚尺寸盘、全尺寸裂纹扩展盘试验件;通过低循环疲劳试验,展现了两种不同的低循环疲劳失效机理,验证了提出的低循环疲劳寿命预测方法;通过裂纹扩展试验,获得了FGH96全尺寸轮盘的裂纹扩展特性,揭示了FGH96全尺寸涡轮盘与紧凑拉伸试样裂纹扩展特性具有显著差别的客观规律;获得FGH96全尺寸涡轮盘580℃损伤容限值,明确某发动机高压涡轮盘损伤容限水平.      

An error analysis and optimization method for combined measurement with binocular vision

The accurate measurement of surfaces of large aviation components is vital for the assessment of manufacturing and assembly quality of such components. To satisfy the measurement requirement of large-size components, most current researches pay more attention to combined measurement methods utilizing different measuring instruments, but the related researches on error analysis and optimization methods are not taken enough attention. This paper proposes a combined laser-assisted measurement method with feature enhancement techniques, and it also develops an error propagation model of the main factors affecting the overall measurement error in detail. Firstly, the surface of a large-size component is measured by the measurement system at multiple stations. Secondly, a control point coordinate system is established as a bridge to unify all local measurement data into the global coordinate system. To improve the overall measurement accuracy, the pixel extraction error as a key factor causing the overall measurement error is analyzed in detail. Next, the error propagation model is established, and some optimization strategies of layout for minimizing measurement error and transformation error are researched. Finally, experiments are carried out to verify the effectiveness of the proposed method. The results show that the measurement error of the proposed method reaches 0.073% and 0.14% with a 1D standard ruler and a flat plate, respectively.     

大攻角状态压气机分离流及叶片动力响应特性

为研究大攻角状态压气机转子内部分离区的脱落和传播过程及转子叶片对其动力响应问题,对某跨声速压气机级进行了非定常数值模拟和双向迭代流固耦合数值模拟。研究结果表明,在近失速状态,转子叶片通道内会周期性地发生2次叶背分离区的脱落和传播现象。第1个分离区主要表现出轴向传播特性,其会对下游流场产生影响;第2个分离区主要表现出周向传播特性,其会作用于周向相邻的转子叶片,对转子叶排自身产生激励作用,进而影响叶片表面压力分布,引起叶片较强的动力响应,对叶片结构强度的影响不可忽略。非定常/流固耦合计算手段能够较全面地预测流场中激励源的频率、幅值与位置等,在压气机设计阶段应对此类预测工作予以重视,以期更准确地预测叶片共振及动力响应等问题。     

Influence of dark matter on light propagation in solar system

We investigated the influence of dark matter on light propagation in the solar system. We assumed the spherical symmetry of spacetime and derived the approximate solution of the Einstein equation, which consists of the gravitational attractions caused by the central celestial body, i.e. the Sun, and the dark matter surrounding it. We expressed the dark matter density in the solar system in the following simple power-law form, ?(t,r)=ρ(t)(?/r)^k$?(t\text{,}r)=\rho (t)(?/r{)}^k$, where t is the coordinate time; r, the radius from the central body; ?, the normalizing factor; k, the exponent characterizing r  -dependence of dark matter density; and ρ(t)$\rho (t)$, the arbitrary function of time t. On the basis of the derived approximate solution, we focused on light propagation and obtained the additional corrections of the gravitational time delay and the relative frequency shift caused by the dark matter. As an application of our results, we considered the secular increase in the astronomical unit reported by Krasinsky and Brumberg (2004) and found that it was difficult to provide an explanation for the observed dAU/dt = 15 ± 4 m/century.     

基于最小二乘支持向量机的SAR平台定位

将SAR平台定位分解为粗略定位和精确定位两个阶段。首先,在SAR正侧视成像的条件 下,利用某个方位门内的所有控制点,采用非线性最小二乘平差粗略估计出SAR平台在该方 位时刻的空间位置,并从理论上推导了控制点的误差协方差矩阵到SAR平台定位的误差协方 差矩阵的传递规律。其次,利用各个方位时刻粗略估计的SAR平台位置,采用最小二乘支持 向量回归机精确估计SAR平台的运动方程,从而精确估计SAR平台在某个时刻的空间位置。仿 真试验表明,本文提出的方法能够精确地反演出SAR平台的空间位置。
     

基于经验的工程变更传播路径预测方法

 针对航空产品工程变更不易预测传播路径的问题,本文利用信息论和统计学的有关原理,提出了一套基于经验的工程变更传播路径预测方法。利用熵和互信息的概念,从海量经验数据中获取在预测过程中起到重要作用的参数;以其为样本空间,提出了一种从语义和变更影响两个角度计算变更参数相似度的算法;基于贝叶斯公式,分析了多因素情况下,相关参数的被影响概率,以此作为判断变更路径的依据;最后,以某型号航空涡轮叶盘为例对本文方法进行了验证,结果表明本文方法具有一定的准确度和优越性。     

低声爆静音锥设计方法研究

 声爆精确预测及低声爆设计方法已成为新一代军民用超声速飞机研制过程中必须解决的关键难题之一。基于计算流体力学(CFD)、波形参数法以及MARK-VII方法构建了高精度声爆预测方法,利用该方法对低声爆静音锥的设计展开研究。研究结果表明,静音锥的设计存在临界长度,静音锥长度小于临界长度时,静音锥产生的激波在传播过程中与机头弓形激波合并,静音锥无法起到降低声爆的作用;静音锥长度大于临界长度时,声爆水平也会略有上升。静音锥临界长度随飞行高度和飞行马赫数的变化而变化,可以根据实际飞行状态采用可伸缩设计,达到最佳的低声爆效果。多级静音锥利用多道弱激波取代机头强弓形激波,其声爆水平较单级静音锥也更低,同样,多级静音锥每一级的长度也要达到临界长度。不同静音锥头部形状产生的脱体激波形状不同,脱体距离也不同,导致阻力系数以及静音锥壁面温度有所不同,但静音锥头部形状对远场声爆信号的影响并不明显。采用静音锥的低声爆方案与原始方案比较,声爆水平得到大幅降低,阻力系数略有上升。     

基于时频分析的裂纹转子碰摩故障特征研究

为研究转子系统耦合故障特性,采用有限元方法建立了含有横向裂纹、转静碰摩的非线性转子动力学模型。首先研究了不同转速下裂纹、碰摩单一故障下转子系统的振动响应,其次研究了两种故障耦合情况下系统的振动响应特征。采用波形图、FFT谱图、瞬时频率和Hilbert-Huang时频谱(HHS)相结合的方法对故障转子振动信号进行了分析。分析结果表明:运用多种时频分析相结合的方法可以较为全面地了解转子的故障特征,裂纹转子在1/5、1/3临界转速时会发生较为明显的5X、3X谐波,且裂纹的产生会导致响应幅值增大,从而引起更为严重的碰摩。     

Estimation of ballistic coefficients of low altitude debris objects from historical two line elements

This paper presents a new method for estimating ballistic coefficients (BCs) of low perigee debris objects from their historical two line elements (TLEs). The method uses the drag perturbation equation of the semi-major axis of the orbit. For an object with perigee altitude below 700 km, the variation in the mean semi-major axis derived from the TLE is mainly caused by the atmospheric drag effect, and therefore is used as the source in the estimation of the ballistic coefficient. The method is tested using the GRACE satellites, and a number of debris objects with external ballistic coefficient values, and agreements of about 10% are achieved.     

氢对TC4钛合金电子束焊接头疲劳裂纹扩展速率的影响

采用充氢CT试样对TC4钛合金电子束焊接头的室温疲劳裂纹扩展速率进行了测定,并对试样断口和接头各区显微组织进行了观察.试验结果表明:充氢母材试样在低速扩展区和失稳扩展区的da/dN相对于未充氢试样有明显的提高,但不同氢含量之间差别不大,在稳态扩展区(Paris区),氢对da/dN的影响很小.充氢焊缝试样在整个裂纹扩展过...